1128BSB

For Sale From Direct Owners

Reference 1128BSB
Type Barge - Crane Barge
Class RINA
Build year / place 1972 / JAPAN
Length (m) 72
Breadth (m) / Depth (m) 30 / 5.3
NT (tons) / GT (tons) 1110 / 3703
Engine(s) power (BHP) 1450
Engine(s) 2 x diesel shinko S 818S
Location MEDITERRANEAN
Price 1,350,000 EUR

Interested in this vessel?

Please, feel free to contact us at any time.
We remain at your entire disposal.

Detailed Information

General
Built Year & Place 1972 / JAPAN
Hull Material steel
Flag ITALY
Class Society and Notation RINA Expired
Next DD
Next SS
Next Annual Survey
Principle Dimensions
Length Overall (m) 72
Length Between Prep. (m)
Breadth (m) 30
Depth (m) 5.3
Draft (m) 2.8
NT (tons) 1110
GT (tons) 3703
DWT (tons)
Machinery & Propulsion
Total Power Output (BHP) 1450
Main Engine(s) 2 x diesel shinko S 818S
Main Propulsion System twin screw
Auxiliary engine(s) 1 KW , caterpillar 170 hp,1 X 250 KW , shinko
Propellers
Speed Maximum (knots)
Speed Cruising (knots)
Cargo & Tank Capacities
Deck Cargo (tons)
Deck Area (m2)
Deck Load (tons/m2)
Fuel Tanks Capacity (m3)
Fresh Water Tanks Capacity (m3)
Ballast Tanks Capacity (m3)
Additional Information

Owners can guide on costs and works to reactivate the Vessel.
1000 tons Lifting Capacity
Draught light: 1.37 m

MACHINERY
Main engines for main and secondary hoist: 2 x Diesel Engine Shinko Type S 818SI-4 stroke 8 cyl. In Line HP 725 at 1350 rpm
Gen Set: 1x diesel engine Shinko Type S 617 SCE-6 Cyl in Line HP 300 at 1200 RPM. Driving 1 alternator SHINKO-DENKI type FUKI-A-680. 250 KvA -3 x 225 V-60 Hz, 1x diesel engine CATERPILLAR type 3304 – 4 cyl 170 HP at 1800 rpm driving 1 alternator

ACCOMMODATION
On the upper floor of superstructure: 1 one berth cabin with sanitary and shower room, 3 one berth cabin. On main deck accommodations: 6×1 berth cabin; 2×2 berths cabin. Large mess room, galley, store-room, sanitary and showers room, laundry and deck store
Aconditioning: fully ari-conditioned, temperatures as per ISO standards (heated an cooled)

PERFORMANCE
MAIN HOIST: 2×500 tons = 1000 Ton SWL, Horizaontal distance between hull edge and hoist C.L. = 21 m, Hoist’s eight above sea level = 53 m, Hoist speed = 1 m/min
SECONDARY HOIST: 1x 200 ton SWL, Horizontal distance between hull edge and hoist C.L. 0 26 m, Hoist’s eight above sea level = 61 m, Hoist speed = 2m/min. Th emain and secondary hoisting systems are operated from remote control room, where there are located: switches board, control panel with levers, electronics load indicators, hydraulic pressure gauges for main, secondary and servo Hydraulic-oil systems
TANK CAPACITIES: Balancing Ballast=3.538 m3, Fresh Water= 137 m3
TRIMMING PUMPS (BALLAST TRANSFER): 2 E/Pumps EBARA Type 300 SZM 1200 m3/hour at 7 m head, Driven by E. Motor 37kw-220v-60 Hz
HOISTING AND WARPING HYDRAULIC SYSTEMS: The 2 main diesel generators driving via 2 reduction-gear boxes SHINKO-ZOKI: 9 Hydraulic pumps
EBARA OHS 32-9F for winches systems, 2 Hydraulic pumps EBARA PLB 3055 for brakes and servo-control systems
WINCHES FOR MAIN 500 TON HOIST: 2 winches type HAKODATE driven by 4 hyd. motors EBARA OHM 105 FSE, 1+1 drum with a capacity of 1400 m diam 50mm steel wire rope, Blocks: ASAHI with 22 pulley diam. 1000 mm and 10 pulleys diam 1000 mm
WINCH FOR SECONDARY 200 TON HOIST: 1 winch type HAKODATE driven by 2 hydr. Motors EBARA OHM 105 FS2, 2 twins drums with a capacity of 610 m diam. 40mm steel wire rope, Blocks: ASAHI with 8 upper pulleys diam. 800 mm and 7 lower pulleys diam. 800 mm

ANCHOR, MOORING AND AUXILIARY WINCHES
2 anchor/mooring 15 ton winches twin drum: mooring drum diam. 1000 mm, wide 600 mm with 200 m steel wire rope diam. 26mm
2 anchor drum diam. 900 mm, wide 1200 with 400 m steel wire rope diam. 45mm connected by chain at 5,3 ton. anchor
4 mooring / warping 15 ton winches single drum: diam. 700 mm wide 1100 mm with 400 m steel wire rope diam. 32mm
3 Auxiliary, general service, 10 ton winches. Single drum: diam. 700 mm with 300 m, steel wire rope diam. 28 mm. One of this unit works as anchor winch
5 Auxiliayr hooks, general purpose, 5 ton. winches with 2 booms. Working steel wire rope diam. 26mm

ELECTRONICS
Communication: 3 portable GMDSS A1 and radio equipment

LIVE SAVING EQUIPMENT
2 x Liferaft for 16 persons, 2×8 persons, life jackets

All details are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

Any questions?
Get in touch and we’ll get back to you.

Please, feel free to contact us at any time.
We remain at your entire disposal.