DO0163

For Sale From Direct Owners

Reference DO0163
Type Dredger - Cutter Suction Dredger
Class BV
Build year / place 1984 / NETHERLANDS
Length (m) 66
Breadth (m) / Depth (m) 11.9 / 2.85
NT (tons) / GT (tons) 101 / 337
Engine(s) power (BHP) N/A
Engine(s) x
Location MIDDLE EAST
Price 1,550,000 EUR

Interested in this vessel?

Please, feel free to contact us at any time.
We remain at your entire disposal.

Detailed Information

General
Built Year & Place 1984 / NETHERLANDS
Hull Material steel
Flag QATAR
Class Society and Notation BV Lay Up
Next DD
Next SS
Next Annual Survey
Principle Dimensions
Length Overall (m) 66
Length Between Prep. (m)
Breadth (m) 11.9
Depth (m) 2.85
Draft (m) 2.11
NT (tons) 101
GT (tons) 337
DWT (tons)
Machinery & Propulsion
Total Power Output (BHP) N/A
Main Engine(s) x
Main Propulsion System
Auxiliary engine(s) 1 X 110 KW , 1500rpm,LL30 14B Leroy Sommer,1 X 25 KW , 1500rpm,GT4 170 Ofel
Propellers
Speed Maximum (knots)
Speed Cruising (knots)
Cargo & Tank Capacities
Deck Cargo (tons)
Deck Area (m2)
Deck Load (tons/m2)
Fuel Tanks Capacity (m3)
Fresh Water Tanks Capacity (m3)
Ballast Tanks Capacity (m3)
Additional Information

Vessel is in class lay-up and the maintenance lay-up program is strictly followed by Sellers personnel. Condition of the vessel is reported to be good.

Diesel engines
1x 1142 hp, 840kw, 1200rpm, D399TA Caterpillar Hydraulic pumps,air compressor, cutter bearing flushing-and spare bilge pump
1x 39hp, 29kw, 1800rpm H3 3A Lister air compressor, bilge pump, generator and hydraulic emergency pump
1x 120 hp, 88kw, 1500rpm P110E Perkins Main generator
2x 1142 hp each, 840kw each, 1200rmp D399 TA Caterpillar dredge pump,gland pump and cover flushing pump

Generators
1x 25 kVA 380v 50 Hz 1500 rpm GT4 170 Ofel AC auxiliary
1x 110 kVA 380v 50 Hz 1500 rpm LL3014B Leroy Sommer AC mains

Capacity tanks
ballast center 50 m3 – ballast aft 83 m3 – ballast fore 27 m3
fuel 160 m3 – drinking water 3 m3

General dredge data
max dredging depth 16 m (with straight ladder)
min dredging depth 3 m with straight ladder
max dredging depth ladder with wedged piece 14 m
min dredging depth ladder with wedged piece 1.2 m
draught dredging 1.8 m
draught intern. loadline 2.1 m
depth spud carriage pontoon 2.80 m
height above waterline 10.50 m
height above waterline mast tilted 8.80 m
weight (lightship) 504 T
weight spud carrier pontoon, incl. spud carrier, without spuds 94 T

Cutter
motor type hydraulic – max shaft speed 30 rpm
total engine power 6 x 95 kW at 136 rpm
total shaft power 552 kW at 19.2 rpm

Dredge pipeline
suction diameter 750 mm – discharge diameter 650 mm

Dredge pump
suction diameter 700 mm – discharge diameter 630 x 450 mm
motor type diesel
impeller blade diameter 1900 mm – impeller inside width 350 mm
impeller outside width 430 mm – max impeller diameter 1925 mm
impeller number of blades 5
total engine power 1680 kW at 1200 rpm
total shaft power 1618 kW at 313 rpm

Spuds
walking spuds full stroke (min dredging depth) 5.32 m
spud carriage speed 7 m/min
hoisting cylinder stroke 2600 mm
lifting height 3550 m – hoisting speed 16.80 m/min
diameter 850 mm – length 21.4 m
weight 14.15 T
max depth below baseline 16 m- min depth below baseline 0 m

Swing winches
rated power 176 kW
nominal swing speed 22.8 m/min
max swing speed 22.8 m/min
number of engines 2
motor type Hydraulic motor
rated pulling force first layer 240 kN at 20 m/min
max pulling force first layer 260 kN at 20 m/min
stalled pulling first layer 284 kN
max wire speed 20 m/min
wire rope diameter 36 mm
total engine power 190 kW at 136 rpm

tonnage rule for inland navigation – max displacement 755.911 m3
tonnage rule for inland navigation – spud ponton 117.085 m3
tonnage rule for inland navigation – total 872.996 m3
length ladder 23.1 m – length dredger overall 52.60 m
length carrier pontoon 16.6 m

dredge can be dismantled into
1 machinery pontoon (L/B/D) 24.85/4.30/2.85 m – 190 t
2 side pontoons 22.05/3.74/2.80 m – 39 t each
2 side pontoons 11.90/3.74/2.80 m – 17,5 t each
2 spud carrier pontoons 16.20/2.85/2.80 m – 28 t each
1 connection frame 3.50/1.95/2.80 m – 5,8 t
1 ladder forward part 8.60/3.57/3.25 m – 40 t
1 ladder aft part 14.5/3,99/2.41 m – 25,3 t

All details are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

Any questions?
Get in touch and we’ll get back to you.

Please, feel free to contact us at any time.
We remain at your entire disposal.

Contact Us