1169BSB

For Sale From Direct Owners

Reference 1169BSB
Type Dredger - Cutter Suction Dredger
Class BV Class1
Build year / place 2004 / NETHERLANDS
Length (m) 26
Breadth (m) / Depth (m) 6.69 / 1.87
NT (tons) / GT (tons) /
Engine(s) power (BHP) N/A
Engine(s) x
Location BALTIC
Price 730,000 EUR

Interested in this vessel?

Please, feel free to contact us at any time.
We remain at your entire disposal.

Detailed Information

General
Built Year & Place 2004 / NETHERLANDS
Hull Material Steel
Flag LATVIA
Class Society and Notation BV Class1 Hull dredger coastal
Next DD
Next SS 06/2025
Next Annual Survey
Principle Dimensions
Length Overall (m) 26
Length Between Prep. (m)
Breadth (m) 6.69
Depth (m) 1.87
Draft (m)
NT (tons)
GT (tons)
DWT (tons)
Machinery & Propulsion
Total Power Output (BHP) N/A
Main Engine(s) x
Main Propulsion System
Auxiliary engine(s)
Propellers
Speed Maximum (knots)
Speed Cruising (knots)
Cargo & Tank Capacities
Deck Cargo (tons)
Deck Area (m2)
Deck Load (tons/m2)
Fuel Tanks Capacity (m3)
Fresh Water Tanks Capacity (m3)
Ballast Tanks Capacity (m3)
Additional Information

Sale price consists on:
Dredger kit with spare parts and accessories.
Only 1000 m of pipelines are available now and, if sold, the price changes proportionally.

Additional s pareparts and equipment
1. Ladder Extender for dredging works up to 12.5m 1SET
2. Floating pipeline PE pipe 500mm OD with flanges about 3540m
3. Boll joint 500mm with rubber expansion pipe L= 2000mm 1SET
4. Dredge pump Cover 1pcs
5. Elbow pipe 90 degrees, 450mm ID 1pcs
6. Intermediate pipe 600m, 450mm ID 1pcs
7. Rubber expansion pipe L=1300mm, 450mm ID 1pcs NEW
8. Rubber expansion pipe L=2000mm, 450mm ID 1pcs
9. Rubber compensation joint, 450mm ID, L=200mm 1PCS NEW
10. Seals and gaskets for spud hoisting cylinders, gearbox, dredge pump etc.
11. Hydraulic cartridge Vickers 1pcs
12. Proportional solenoid valve for ladder winch 1pcs
13. Three part clamb ring w130 for cutter drive 3pcs
14. Some any other spares on board.
15. Long spud poles

Length over pontoons 16.50m
Mean draught with full bunkers 1.25m
Internal diameter of discharge main pipe 450mm
Internal diameter of available discharge line 500mm
Available length of discharge HDPE pipe line up to 3500m on stock
Maximum standard dredging depth – 10.00m
Maximum dredging depth by ladder extender – 12.50m

Spud poles
Diameter: 457mm
Spud poles L=14m for 10m dredging depth
Spud poles L=17.5m for 12.5m dredging depth
3mtr Ladder Extender with pipeline and hydraulic hoses kit

Engines
Prime mover: Caterpillar 3508 620kW, Engine 70% of lifetime with load 1100 -1200 RPM, About 37000 hours, Top End 2020 Y
Dredge pump driven via clutch/reduction gearbox. Dredge pump IHC-1100-200-400, pump installed new in 2016
Auxiliary power: Caterpillar 3306 212kW, About 4000h, Major Overhaul with long block replacement 2019 Y

Other
All winches have independent hydraulic drive.
The two swing winches are supplied with wires of about 100m and anchors of 360kg.
All parts are with dimensions to allow the IHC Beaver 1200 to be transported by road, rail or sea.
The dredger is equipped with a rapid connection-disconnection system for the pontoons. Various components are mounted in or on the main pontoon, including the cutter ladder, two swing winches, ladder hoisting winch, control cabin, dredge pump, diesel engines and auxiliary power units, discharge line and the spuds with cylinders.

Documents, pictures and any other data available by request.
Please note, at present moment dredger located on working site about 400km away from nearest port terminal.

All details are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

Any questions?
Get in touch and we’ll get back to you.

Please, feel free to contact us at any time.
We remain at your entire disposal.