DO0320
For Sale From Direct Owners
| Reference | DO0320 |
| Type | Dredger - Trailing Suction Hopper Dredger |
| Class | ABS |
| Build year / place | 1980 / UNITED STATES OF AMERICA |
| Length (m) | 60 |
| Breadth (m) / Depth (m) | 12.43 / 5 |
| NT (tons) / GT (tons) | / 760 |
| Engine(s) power (BHP) | 1700 |
| Engine(s) | 2 x Caterpillar D398 |
| Location | EAST UNITED STATES |
| Price | 5,000,000 USD |
Interested in this vessel?
Please, feel free to contact us at any time.
We remain at your entire disposal.
Detailed Information
General
| Built Year & Place | 1980 / UNITED STATES OF AMERICA |
| Hull Material | Steel |
| Flag | UNITED STATES OF AMERICA |
| Class Society and Notation | ABS |
| Next DD | |
| Next SS | 01/2027 |
| Next Annual Survey |
Principle Dimensions
| Length Overall (m) | 60 |
| Length Between Prep. (m) | |
| Breadth (m) | 12.43 |
| Depth (m) | 5 |
| Draft (m) | 4.45 |
| NT (tons) | |
| GT (tons) | 760 |
| DWT (tons) |
Machinery & Propulsion
| Total Power Output (BHP) | 1700 |
| Main Engine(s) | 2 x Caterpillar D398 |
| Main Propulsion System | Twin Screw |
| Auxiliary engine(s) | |
| Propellers | |
| Speed Maximum (knots) | |
| Speed Cruising (knots) |
Cargo & Tank Capacities
| Deck Cargo (tons) | |
| Deck Area (m2) | |
| Deck Load (tons/m2) | |
| Fuel Tanks Capacity (m3) | 95 |
| Fresh Water Tanks Capacity (m3) | 28 |
| Ballast Tanks Capacity (m3) |
Additional Information
Bottom Dump and Bow Discharge Capability
Max effective dredging depth approximately 1.651 m
MAIN ENGINES:
Main engines driving 2 x Niigata ZP-D8 Z Drives.
Rebuilt 2021 with 1154 & 1205 Hours.
SERVICE GENERATORS:
(2) Caterpillar 3306 both Rebuilt 2021, now with 1588 and 1626 Hours.
DREDGE GENERATOR:
Generator Caterpillar C27 with 14,500 Hours.
DREDGE:
700 hp. Dredge Motor; 1.62m Suction Head; 0.56m Suction pipe; 0.51m Discharge pipe
AIR COMPRESSORS:
(2) Quincy 350L
ACCOMMODATIONS:
Vessel has 15 beds, 9 on the first floor, 4 on the second floor and 2 on the third floor.
VERT. DIST. BOTTOM: Top of Mast 22.67 m
LIGHT DRAFT: Fwd. 1.61 m
LIGHT DRAFT: Aft.2.65 m
LIGHT DRAFT: Avg. 2.13 m
LOADED DRAFT: Avg. 4.45 m
GROSS TONNAGE: 760.60 LT
LIGHTSHIP DISPLACEMENT: 919.13 LT
SUMMER FREE DISPLACEMENT: 2470 LT
SUMMER FREE DWT: 1506 LT
NUMBER OF DRAGARMS: 1
MAX. DIGGING DEPTH @ 45 DEG.: 19.81 m
AVAIL. PUMP HP: 1 @ 700
PUMP RPM: Dredging 290
PUMP RPM: Pumping Out 360
PUMP IMPELLER DIAMETER: 1.22 m
JET PUMP HP: 180
SUCTION PIPE I.D.: 0.55 m
DISCHARGE PIPE I.D.: 0.5 m
DREDGING MARK TONNAGE: 2850 LT
HOPPER CAPACITY: 1300 CY
HOPPER LENGTH: 32
HOPPER WIDTH: 6.7 m
OVERFLOW MINIMUM: 760 CY
PUMP OUT CAPACITY: Yes
MAX. PROPULSION: 2 @ 850
SURVEY EQUIPMENT
(1) Ohmart VEGA Nuclear Density Gauge
(2) VEGAPULS65 Ullage Sensors
(2) Trimble SPS865 Receivers Installed
(3) GPS Antennae & Cables Installed
(4) Rosemount pressure/suction transmitters
(1) HD25A Sensor Installed on Davit
(1) Pitch/roll inclinometers (2) in shared housing
(2) RPM Sensors
(2) Hannay hose reels for ¼ – 3/8” hose.
1 – Main PLC – SLC500- (Power supply, CPU, scanner module, 2 analog input modules, 2 digital input modules) on an 8-card rack
1 – Remote PLC – SLC500- (Power supply, adapter module, 3 analog input modules)
SPARES
(1) Back door for the dredge pump
(3) C27 generators in various states of repair
(4) Keel coolers
(1) GE 752 dredge pump motor
(2) drag head HPU motors
(2) dredge valve bonnets
(2) rubber flex hoses for drag arm
(2) jet water pump motors
(1) complete Z drive with propeller
(2) twin disk propulsion clutches
Complete set of rubber hopper seal
(1) hydraulic steering motor
(1) Straatman bow connection
All details are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
